Nvidia could well rely entirely on the new 16-pin power connector for its next graphics cards

The RTX 5000 technology from Nvidia might require a 16-pin energy connector of the sixth PCI technology

With the discharge of the RTX 4000 “Tremendous” graphics playing cards Nvidia’s work on the Ada-Lovelace technology might be coming to an finish. The following sequence, the RTX 5000 (“Blackwell”), is already on the horizon and is anticipated to be launched by early 2025 on the newest.

Now the primary rumors concerning the upcoming GPUs are step by step accumulating. Nvidia’s RTX 5000 sequence is alleged to rely solely on a 16-pin energy connector. In distinction, slower and cheaper RTX 4000 fashions typically nonetheless depend on a traditional 8-pin connector

That is what the leak claims: The rumors come from YouTuber “Moore’s Regulation is Useless”, who refers to 4 completely different sources. In response to this, Nvidia is aiming for an entire swap to the “PCIe 6.0 16-pin connector” with RTX 5000.

The ability connector is meant for all fashions of the Blackwell technology, together with an RTX 5060. For Nvidia, the 16-pin connector is already established as the present trade customary, which is why it is sensible for the producer to depend on it fully.

With a uniform customary for the facility provide throughout all GPU fashions, Nvidia would finally lower your expenses on materials prices.

By way of energy consumption, alternatively, Nvidia may make corresponding gradations – the fanatic GPUs resembling an RTX 5090 ought to be capable to devour as much as 600 watts, whereas decrease fashions must be equipped with as much as 450 or 300 watts.

What is supposed by PCIe 6.0?

Now the time period “PCIe 6.0” from MLID is just not fairly correct – as a result of the leak has nothing to do together with your PCI Categorical slot, as you would possibly first assume from the video title.

That is extra more likely to be the PCI-CEM 6.0 (“PCI Categorical Card Electromechanical”) specification, which is meant because the successor to PCI CEM 5.0 – you’ll most likely know this underneath the title “12VHPWR”.

An already identified a part of PCI CEM 6.0 are the shortened sensor pins that have been launched with the 12V-2×6 connector (unofficially PCI CEM 5.1) to keep away from doubtlessly melting cables and connectors.

Correspondingly, the PCI CEM 6.0 specification is just not fully new, because the RTX 4000 Tremendous graphics playing cards talked about firstly rely solely on the 12V 2X6 connector, and the identical applies to the RTX 4090 as much as the RTX 4070 Ti.

What would change for you

Most likely not a lot, as the brand new energy connection through adapter can be appropriate with older energy provides with sufficiently traditional 8-pin connectors, as a supposed Nvidia supply additionally emphasizes in accordance with the video from MLID

Such adapters are sometimes equipped by GPU producers if their GPU depends on a brand new energy connector with 16 pins.

This also needs to apply to Nvidia’s slower fashions within the RTX 5070 and RTX 5070 (Ti) sequence if, in contrast to their predecessors within the present technology, they often depend on the brand new energy connector.

What’s AMD’s place on this? One other MLID supply is alleged to have come from AMD and defined that the producer had thought-about the 16-pin connector for the Radeon GPUs.

Nevertheless, AMD has determined that that is “an pointless new customary”, which is why it was not launched for RDNA 3 – and that is unlikely to vary with RDNA 4 both.

As an increasing number of new energy provide models additionally supply a cable with a 16-pin connector, it stays to be seen to what extent this may show to be the case sooner or later.

The unique drama surrounding the 12VHPWR connector doesn’t faze Nvidia in accordance with the leak – do you? Would you belief a modified 16-pin connector to your graphics card or do you agree with AMD, who see the usual as pointless? Tell us within the feedback under